How is marble cleaned

Cleaning marble - so the precious stone stays beautiful longer

When you hear the word marble, you immediately think of Italian mansions, luxurious bathrooms or valuable floors that give a house a grand appearance. What was once an accessory for the beautiful and the rich is now enjoying growing popularity among ordinary Otto consumers. Whether marble floor, marble tiles in the bathroom, a noble tabletop on the living room table or an exclusive worktop made of marble and granite. The areas of application for this natural stone are truly diverse. In order for this valuable stone to remain shiny and beautiful for many years, it must of course also be cared for and cleaned regularly. Here are some tips for proper care and how to protect the sensitive marble from scratches and other damage.

Interesting facts about marble

Before you start looking after the marble, here are some useful facts about this limestone. If you look at it geologically, marble belongs to the limestone category, which results from the fact that it was once made from limestone. For this reason, it is best to use the same care tips when cleaning marble as for conventional natural stones.

The care of marble

In addition to regular cleaning of the marble surfaces, some precautionary measures should be taken in advance so that the sensitive natural stone is not damaged. So you should absolutely refrain from placing sharp objects directly on a marble table or marble floor, otherwise scratches will occur. In addition, all furniture that will later be placed on a marble floor should be covered with non-slip pads in the lower area. Work documents should generally be used for all work surfaces.

A few small measures should also be taken when cleaning marble surfaces, marble tiles and marble floors. Marble should only be cleaned with a fine cloth that is slowly moved over the surface with circular movements. Pressing too hard or even scrubbing should be avoided here. If dust has settled on the marble floor, it is sufficient for cleaning to briefly moisten the cloth with warm water as a cleaning agent.

If the dirt is a little more stubborn, a natural, light soap or a special marble cleaner can be used to care for the marble. If the marble surfaces are lighter in color, hydrogen peroxide can also be used as a cleaning agent.

Even though there are many household remedies for cleaning floors, it is essential to avoid using vinegar, harsh cleaners, acids and alkalis, lime cleaners or care oils when cleaning marble. In the long run, these cleaning agents damage the marble more than they do it good.

Should it ever happen that coffee, orange juice, wine, caraway seeds or even curry powder lands on the marble, this dirt should be removed immediately with a damp cloth. After wiping up, the marble should also be wiped dry immediately with a soft cloth. The surfaces can then be polished with chamois leather.

Tips on how to remove stains properly

Of course, it is also inevitable on marble-limestone that stains will form there. It is important to clean them as gently as possible. First, the stained area should be briefly moistened with water. A simple mixture of baking soda and water is enough to remove the stain afterwards. This paste is applied as thick as possible to the stain and then covered with foil, which remains on the marble until the next day. The next day, the foil is simply removed and the mixture is cleaned with a damp cloth with gentle movements.

There is also a simple cleaning agent for grease stains on marble. Simply put a little cornstarch on the grease stain and let it work for about 20 minutes. Then carefully remove the stain with a damp cloth.

The gentle removal of scratches on marble surfaces

In addition to numerous stains, it can also happen that small scratches form on the marble surfaces. Here are some tips on which means can best be used for this. In the case of slight scratches, it is completely sufficient to rub the scratch with a wet cloth and a little washing-up liquid with gentle movements. If the scratch is no longer visible, the marble can be carefully wiped dry and then polished a little.

If the scratch is a little stronger, fine-grain sandpaper can be a good help for cleaning. This is rubbed over the scratch with careful movements until it is gone. If the scratches are still visible at the end, it is advisable to bring a marble cleaning specialist into the house. These specialists have special equipment that allows scratches to be removed quickly.

Wax, tar, oil or limescale deposits on marble

In addition to conventional dirt or liquids, it can happen, albeit rarely, that wax, liquid oil, lime or even tar land on the sensitive marble. Of course, you want to remove this contamination quickly. Here it is advisable to obtain a special cleaning agent from a marble dealer for cleaning. Similar to conventional household stains, the trade offers a whole range for different types of soiling.

If too much limescale has settled on the marble floor, it is better not to clean it with limescale cleaner, as these cleaners contain sharp substances that damage the marble. Here it is better to carefully remove the lime with a scraper.

Marble slabs in the outdoor area - this is how the natural limestone stones stay beautiful longer

When it comes to marble stairs and marble slabs in the garden or on the terrace, you should consider the points that you can also use for all marble surfaces in the house. Unlike the marble in the living room or in the kitchen, the marble surfaces outside the house are exposed to all kinds of weather conditions, which is why it doesn't hurt to clean them during spring cleaning.

In order not to destroy the sensitive surface of the limestone slabs, the very popular high-pressure cleaner should rather remain in the corner. Here it is much better to get rid of the dirt with a broom or a soft brush. If the slabs are extremely dirty, you should ask the marble specialist which additional cleaners are best for maintenance.

Impregnation protects against dust and dirt

If you want to make the frequent care of marble a little easier, you should also apply an impregnation for marble from the trade when laying the marble floor or marble tiles. This has the great advantage that this natural stone is protected from dirt, dust and other damage. In this way, the marble surfaces in the outdoor area are better protected against wind and weather. And if you accidentally pour coffee, oil or other liquids onto the marble, they cannot penetrate the inside and can simply be wiped away.


  1. The impregnation of the marble tiles and marble floors should always be done after laying. Once the impregnation has been applied, the joints can be sealed.
  2. Before you start impregnating, you should make sure that the entire marble surface is dry.
  3. So that the marble remains easy to care for for a long time, the impregnation should be renewed about every five years.

Grinding and polishing - this is how every marble gets a new shine

The ravages of time do not leave their mark on even the most well-cared for marble. At some point the day will come when the marble floor will lose a little of its once brilliant shine. However, there are some tips on how to get your marble floors and marble tiles shiny again. The magic word is grinding and polishing. It doesn't matter whether you just want to make some tiles shine again or even the entire marble floor should be sanded and polished.

In the first step, the marble is first cleaned of light soiling. Then a fine-grained sandpaper is used, with which the marble is sanded down until it shines again. Once the natural stone has been sanded, it can now be polished. Depending on the size of the marble surface, the polish can be applied with a chamois leather or with the help of a handy hand polishing device. If the marble is to be reprocessed as part of a major renovation, it is advisable to bring a marble specialist into the house to sand and polish the surface.


  • Chamois leather
  • 2 soft towels
  • mild dishwashing detergent
  • Hydrogen peroxide for light marble floors
  • baking powder
  • Cornstarch
  • Fine-grain sandpaper
  • Marble polish


Caring for and cleaning marble is relatively easy and not much more time-consuming than regular housework. However, you should be careful not to use any harsh, acidic or alkaline cleaners. Impregnating the marble surfaces after laying can also make regular maintenance easier.

Article image: iiievgeniy /

  • Has this article been helpful?
  • Yes No
Corresponds to a rating of 4.8 / 5